Navanith Ventures
Navanith Ventures
Bellandur, Bengaluru, Karnataka
08048982429 76% Response Rate
Send E-mail

Myk Laticrete Grout

Leading Wholesale Trader of sp-100 epoxy grout from Bengaluru.
Request CallBack
  • SP-100 Epoxy Grout
  • SP-100 Epoxy Grout
  • SP-100 Epoxy Grout
SP-100 Epoxy Grout
Get Best Quote

SP-100 Epoxy Grout

Approx. Price: Rs 2,850 / BucketGet Latest Price
Product Details:
Packaging Size5 kg
Packaging TypeBucket
Model NumberSP - 100
Country of OriginMade in India
SP-100™ Tile Joint is a Stain Resistant, Water Resistant & Germ Resistant grout for Floor & Wall. SP-100 Tile-Joint is suitable for ceramic tiles, vitrified tiles, marble and stone, especially in stain prone areas such as kitchens and washrooms.

Features & Benefits100% StainfreeStrong and durableChemical and temperature resistantAnti-bacterial and anti-fungal
Surface Preparation:Before starting to grout, remove debris in grout joints and lightly sponge the tile surface to remove dust and dirt.Do not clean tiles with acid cleaners. In case acid cleaners were used to clean the tiles, ensure to wash the area with plenty of water before commencing grouting.Substrate temperature must between 60°F (16°C) and 90°F (32°C).
Mixing Empty entire contents of SP-100 Stain free Grout Part “A” and Part “B” container into a clean mixing pail.Mix with a margin trowel or a slow speed drill mixer until liquids are completely blended. Add at least ¾ of SP-100 Tile joint Part “C” Filler Powder and mix to a uniform consistency.Add the remaining filler powder and mix to achieve a stiff mix to work into the joints.Immediately pour entire contents of bucket onto working area. Use a plastic sheet as a drop cloth. Use standard epoxy grouting techniques to work with SP-100 tile joints.SP-100 Tile joint can also be applied with a caulking gun. Be sure all grout joints are packed full.Remove as much excess material as possible before initial cleaning with grout float. Do not leave excess grout on the face of tiles.
Cleaning:Remove excess grout from the face of the tiles with the edge of the grout float. Hold the float at a 90° angle and pull it diagonally across the joints and tile to avoid pulling out the material. 
Initial Cleaning: After 30-45 min of the application of the grout scrub the surface of the tile & joint with clean water and scrubber provided to remove any excess grout. Then take a clean thick white towel and drag across the tile to remove any residue. 
Final Cleaning: Within 24 hours do a second cleaning with normal soap detergent to remove any haze from the tile.
Areas of Application: Kitchens, bathrooms, swimming pools, fountains, water bodies, hospitals,operation theatres, sterilization rooms, restaurants, cafeterias, light industrial applications and high traffic areas.  
Available Packaging Size: 1 kg

Yes! I am Interested