Product Details:
| Packaging Size | 20 Kg |
| Packaging Type | Bag |
| Form | Powder |
| Color | White |
| Coverage | Approx 55-60 sq ft per 20 kg bag |
| Open Time | 30 minutes |
| Mixing | 6.0-6.5 L of Water for 20kg of Powder |
| Pot Life | 4 hours |
The multipurpose high polymer, flexible modified thin-set mortar for interior and exterior installation of ceramic tiles, stone, quarry tiles, glass mosaic tiles, pavers and brick. LATICRETE® 335 Super Flex Multipurpose Floor & Wall Tile Adhesive is designed to mix with water, has a convenient open time with high adhesion and workability.
Features and Benefits:For fixing tiles & stone on demanding external & internal applicationsPolymer modified super flexible adhesive with superior bond strengthHigh performance in all types of weatherSingle component - Just add water
Certification:ANSI: A 118.4ETEN12004/ISO 13007 : C2TES1IS 15477:2019: TYPE 3 TS1 ADHESIVEVOC: Practically Nil
How to apply:Substrate:The surface to be covered with tile/ stone shall be sound and confirm to good design, rigid, clean and free of dirt, oil, grease, curing compounds, form release agents or loose plaster and paint. For economy, the surfaces should be level and true within: Walls – 3mm in 2.5m Floors – 1.5mm in 1.0m
Surface Preparation:If a plaster/leveling mortar bed is applied, ensure that it is cured for at least 7 days to achieve proper strength before application of tile adhesive for installation of tileEnsure the substrate is clean and free from impurities like dust, dirt, debris, oil, grease, curing agents, loose plaster etcDampen the wall before application of thin set adhesiveClean the back of tile for any dust or coating
Mixing:The products can be mixed by hand or slow speed electric drill mixer (less than 300 rpm). Pour potable clean water in a clean container and then add the powder LATICRETE® 335 Super Flex and mix until the mixture becomes creamy and plastic. Do not over mix. Leave the mix to slake for 5-10 min and remix before use. Mix only sufficient quantity of adhesive for immediate need.
Proportion:Approximately 1 bag of LATICRETE® 335 Super Flex with 5-6 ltrs of water. Adjust quantity of liquid to obtain proper consistency.
Application:Designed especially for interior and exterior floor and wall installations of all types of ceramic tile, vitreous, semi-vitreous tile, glass mosaic tiles, precast terrazzo and natural stones over concrete and on a variety of substrates. Good underwater shear bond allows this product to be used for wet areas like swimming pools, sauna, water bodies and washrooms. Can be used for tile on tile applications and also as slurry bond adhesive in wet on wet applications.
Available in Grey color also.
